4inch Helical Rotor Solar Power Submersible Pump, Irrigation Solar Pump, Deep Well Solar Pump
|FOB Unit Price:||US $380 US $330|
|Purchase Qty. (Pieces)||FOB Unit Price|
|Transport Package:||Wooden Case|
|Payment Terms:||T/T, Western Union, Paypal|
- Model NO.: 4SSH3.6/100-D72/1000
- Max.Capacity: 3.6m3/Hr
- Material: Stainless Steel
- Assembly: Liquid Pumps
- Start Up: Electric Pump
- Application: Submersible Pump
- Media: Water Pump
- Theory: Helical Rotor Pump
- Pump&Motor Body: 304 Stainless Steel
- Motor: Full Oil Permanent Magnet Brushless DC Motor
- Controller: 32bit MCU/Foc/Sine Wave Current/MPPT
- Warranty: 3 Years
- Specification: 620*300*150mm
- HS Code: 8413604090
- Max.Head: 100m
- Driving Type: Motor
- Structure: Single-stage Pump
- Power: Solar Energy
- Type: Helical Rotor Pump
- Industry: Solar Pump
- Performance: Solar Pump
- Outlet: 304 Stainless Steel
- Helical Rotor&Screw: 316 Stainless Steel
- Bear: NSK
- Controller Shell: Die-Cast Aluminum
- Trademark: JL
- Origin: Ningbo
We research & development and product the solar power BLDC pump's controller too.
Adopt stainless steel screw and rubber stator, Full Oil Permanent Magnet Brushless DC Motor, with combination of motor and controller, the Max efficiency is over 85%, raise 25% than traditional AC pump.
3. Adopting Soft Start-up System for motor controller. The motor starts up placidly and the current is far less than traditional hardware start-up technology.
4. By detecting the solar power circuit, the controller can prevent the motor from starting up frequently when the solar power is weal. Thereby it can protect the pump motor and prolong the motor lifetime.
5. High technique products adopting MPPT and DSP chip technique. The MCU can detect the circuit automatically and can be displayed by LED.
6. The pump includes Over-voltage Protection / Under-voltage Protection / Over-current Protection / Over-load Protection.
Works from solar modules with or without battery storage via a Pump Controller or Pumping Maximiser.
7. Through groundwater and tank water level detection, as well as the current and voltage detection, the system can work automatically. When the current is overload, the system can restar automatically.
8. Water Level Detector / Sensors is used to connected to the controller and can be used to protect the pump from running dry as well as to automatically turn the pump off when the water tank is full.
9. Battery back-up, runs perfectly on overcast day and in the night.
10. Smart modular design for simple and cost effective servicing and repair.
11. Adopted double plastic package for rotor and stator, motor insulation ≥300MΩ, the motor security was much improved.
12. 100% copper wire, cold-rolled silicon steel sheet. Cast stainless steel components.
13. Natural rubber Sealing and rubber stator.
The following is the specification of 4inch Helical Rotor Solar Pump
Solar Pump's Application Area
1. Agricultural irrigation
2. Drinking water, rear livestock water, village or family water supply
3. Garden/courtyard irrigation systems
4. Desertification control
5. Tank/Cistern filling
6. Water supply for bivouac or camping car
7. Solar water circulating system
8. Renewable energy projects
10. Large scale watering system for commercial establishments
Solar Water Pump System Complete Set Includes:
1. Solar pump with 3m cable. Longer cable is available
2. Sealed Controller
3. Water level sensor or float switch
4. Spare screw
5. Installation Manual
6. Not including solar panel
1. We test the material before production. Three to four times during the production to ensure the goods are in good quality. We could produce according to your requirements.
2. We can be your OEM manufacturer with your authorization of brand.
3. Focus on middle and high-end market, we never seize market by using inferior material.
4. Pumps of different voltage, power, flow and head can be customized according to customers' requirements.
1. More than 30000 hours service life.
2. 36 months warranty.